Research Peptide Glossary: 40 Terms From the Certificate, the Label and the Product Page
Research use only. StarBio products are supplied strictly for in vitro laboratory research by qualified professionals. They are not for human or veterinary use, not for diagnostic or therapeutic use, and have not been evaluated by the FDA. This glossary defines documentation, handling and catalogue terms only.
A research peptide order comes with three kinds of text: the certificate from the laboratory, the label on the vial, and the product page that led you there. Each uses words that mean something precise. This page defines the ones that come up most, grouped by where you meet them. Terms are kept to documentation, chemistry and logistics.
On the certificate of analysis
Certificate of analysis (COA). A laboratory’s report on one sample from one lot: what it is, how pure it is, how much is in the vial, and when it was tested. StarBio publishes its current certificates in the COA library. How to read one field by field: how to read a certificate of analysis.
Third-party (independent) testing. Analysis performed by a laboratory that is not the vendor and not the manufacturer. The lab’s name and report number should appear on the certificate. “In-house tested” is not third-party.
Report number. The identifier the laboratory assigns to a test. It is the thing to look up at the lab, not the PDF. StarBio’s Janoshik reports look like “#136388”; Medutest codes look like “WWB-5AD-4095”. How to check them: verify a Janoshik or Medutest report.
HPLC. High-performance liquid chromatography. A pump forces the dissolved sample through a packed column; components separate by how strongly they interact with the column and are detected as they leave. For peptides the column is usually reverse-phase (C18) and detection is ultraviolet absorbance at 210 to 220 nm. Explained in HPLC and mass spectrometry.
Chromatogram. The trace an HPLC run produces: time on the horizontal axis, detector signal on the vertical, each component a peak. A certificate should attach it, not just summarise it.
Area percent (HPLC purity). The area of the main peak divided by the total area of all peaks, as a percentage. “99.70% purity” means 99.70% of what the detector saw was one component. It says nothing about water, salt or anything the detector cannot see. See what 99% purity actually means.
Retention time. How long a component took to leave the column. Used to match a peak to a reference standard when one is run alongside.
Mass spectrometry (MS). A method that measures the mass-to-charge ratio of ions. For a peptide it confirms identity: the measured mass should match the calculated mass of the sequence. Purity without MS could be 99% of the wrong molecule.
Electrospray ionisation (ESI). The common way of getting a peptide into a mass spectrometer. Larger peptides pick up several charges and appear as a series of peaks that are mathematically combined (“deconvoluted”) back to one mass.
Deconvolution. The calculation that turns a multiply charged ESI series into a single neutral mass. A certificate may quote the deconvoluted mass against the theoretical mass.
Theoretical (calculated) mass. The mass predicted from the formula. Two versions exist: average mass (used for larger peptides, e.g. 3357.9 g/mol for sermorelin) and monoisotopic mass (used for small ones). The certificate should say which it compared against.
Net peptide content. The fraction of the vial’s weight that is actually peptide, as opposed to counter-ions and water. A sample can be 99% pure by HPLC and 80% peptide by weight. Measured by amino acid analysis or elemental (nitrogen) analysis. Rarely on a routine certificate; ask if the mass matters for your work.
Measured content (quantification). The amount of compound found in the vial, in mg, against the labelled amount. Janoshik reports often give it (10.21 mg found against 10 mg labelled on StarBio’s BPC-157 report #136388). More informative than purity alone.
Lot (batch). The quantity of material made and tested together. One certificate covers one lot. Your vial should trace to the lot the certificate describes. See lot numbers and batch traceability.
Lot traceability. The record that connects a specific vial or order to its lot and therefore to its certificate. StarBio keeps this in its order system and returns it through the verify-lot form.
Issue (test) date. When the laboratory analysed the sample. Should be consistent with the lot. A report older than the lot it is attached to describes something else.
Sample photograph. The image of the vial as received by the lab that some laboratories include. Lets you compare the tested item with the product.
On the vial label and the product page
Research use only (RUO). The statement that the material is sold for in vitro laboratory research and not for human or veterinary use, diagnosis or treatment. StarBio prints it on every product page, on labels and in every email, and does not provide dosing or protocol information. Why that matters for the documentation you see: how to vet a research peptide vendor.
Lyophilized. Freeze-dried. The peptide solution was frozen and the ice removed under vacuum, leaving a dry cake or powder. The stable storage form; most StarBio compounds ship this way.
Cake. The pressed disc of lyophilized material at the bottom of a vial. A cracked or shrunken cake is cosmetic; a melted or discoloured one is not.
Labelled amount. The nominal mass of compound in the vial, e.g. “10 mg”. Compare with the certificate’s measured content.
Peptide. A chain of amino acids joined by peptide bonds, conventionally up to about 50 residues; longer chains are proteins. Several catalogue items are not peptides at all and say so: NAD+ is a dinucleotide, 5-Amino-1MQ is a small molecule, Recon Water is a diluent.
Sequence. The order of amino acids, written three-letter (Gly-Glu-Pro…) or one-letter (GEP…). Listed on each StarBio compound page and research guide.
Residue. One amino acid within a chain. “A 15-residue peptide” has 15 amino acids.
Pentadecapeptide, heptapeptide, tripeptide. Peptides of 15, 7 and 3 residues respectively. BPC-157 is a pentadecapeptide; Semax and Selank are heptapeptides; GHK is a tripeptide.
C-terminal amide (-NH2). A modification at the carboxyl end of the chain, replacing the acid with an amide. Written as “-NH2” at the end of a sequence. Changes the mass by about 1 Da and is common in GHRH analogues.
Acetylation (Ac-). An acetyl group on the N-terminus, written “Ac-” at the start of a sequence. Adds 42 Da.
Analogue. A molecule derived from a natural sequence by one or more deliberate changes. Tesamorelin and CJC-1295 are analogues of GHRH; LR3 in IGF-1 LR3 denotes an analogue with an N-terminal extension and an arginine substitution.
Fragment. A shorter piece of a longer natural sequence. Sermorelin is GHRH(1-29); AOD-9604 is a fragment of human growth hormone (residues 177-191) with a modification.
Blend. A product containing more than one compound in one vial, with the amount of each stated. StarBio’s CJC-1295 / Ipamorelin (No DAC) is a blend whose Janoshik report measures each component separately.
Copper peptide (Cu). A peptide complexed with a copper ion, written with “-Cu” (GHK-Cu, AHK-Cu). The copper adds mass and colour (a pale blue solution). The free-peptide mass and the complex mass differ; certificates should say which they report. See GHK-Cu.
Salt form: acetate, TFA, hydrochloride. Peptides are isolated as salts. Acetate is the usual supplied form; trifluoroacetate (TFA) is what comes off the purification column and is often exchanged for acetate. The salt adds weight that HPLC does not see, which is why net peptide content is a separate figure.
CAS number. A unique registry number for a chemical substance from the Chemical Abstracts Service, e.g. 137525-51-0 for BPC-157. The free peptide and its salt can have different CAS numbers. Listed on every StarBio compound page.
Molecular formula and molecular weight. The atom count (C62H98N16O22) and the resulting mass (1419.54 g/mol). Used to check the certificate’s mass against the expected value.
Storage line. The handling conditions printed on the product page: for most lyophilized compounds, store at -20 °C, protect from light, avoid repeated freeze-thaw cycles, in solution 2 to 8 °C short term. See storing lyophilized research peptides.
Freeze-thaw cycle. One pass from frozen to thawed and back. Each cycle stresses a solution; aliquoting avoids repeated cycles.
Diluent (reconstitution liquid). The liquid used to bring a lyophilized cake back into solution. Sterile water has nothing added; bacteriostatic water carries 0.9% benzyl alcohol as a preservative. See bacteriostatic water vs sterile water.
Bacteriostatic. Holding back bacterial growth without killing what is already present. Describes the preservative’s action in a multi-draw vial.
On the catalogue and programme pages
SKU. Stock-keeping unit, StarBio’s own catalogue code (SB-1050 for BPC-157 10 mg). Useful on a purchase order.
Volume pricing. Automatic per-compound discounts by quantity on StarBio: 2 vials 5%, 3 or more 7.5%, 10 or more 40%, 50 or more 50%, as stated on volume pricing.
Research Panel. A set of compounds chosen together at a panel price, described on Research Panels.
Lab Credit. Prepaid store credit sold in blocks with a bonus added ($250 buys $275 of credit, up to $2,500 for $3,125), on Lab Credit.
Rewards and membership tiers. StarBio’s points programme and its Voyager, Nova and Supernova tiers, described on Rewards and Membership. Tier colours on the site are identity only.
W-9, purchase order (PO). Documents institutional buyers may need: the vendor’s tax form and the buyer’s authorisation to purchase. StarBio supplies a W-9 and accepts PO terms on request through the contact form.
Using this page
Every term has an anchor, so a guide, a product FAQ or a post can link straight to a definition (for example #area-percent-hplc-purity). Synthesis, wider test panels, stability and research-literature terms are in the peptide science glossary. If a term you met on a StarBio page is not here, ask through the contact form and it will be added.
For laboratory research use only. Not for human or veterinary use.
New reports and guides, by email
A short note when a new laboratory report is published, when a compound returns to stock, and when a new guide goes up. Nothing else. Leave whenever you like.
For laboratory research use only. No dosing or protocol content is ever sent.

