Semax vs Selank: Two Heptapeptides Compared as Research Materials
Research use only. StarBio products are supplied strictly for in-vitro laboratory research by qualified professionals. They are not for human or veterinary use, not for diagnostic or therapeutic use, and have not been evaluated by the FDA. This page compares compounds as materials: identity, chemistry, analysis and documentation. It does not compare effects or outcomes, and it is not usage guidance.
Semax and Selank are named together so often that they can look like two versions of one compound. They share an origin, a length and a three-residue tail, and almost nothing else. The first four residues of each come from a different natural peptide, and that gives the two quite different chemistry. This page compares them on the points a laboratory can check.
Side by side
| Semax | Selank | |
|---|---|---|
| Type | Heptapeptide (ACTH 4-10 fragment analog) | Heptapeptide (tuftsin analog) |
| CAS number | 80714-61-0 | 129954-34-3 |
| Molecular weight | 813.93 g/mol | 751.89 g/mol |
| Formula | C37H51N9O10S | C33H57N11O9 |
| Length | 7 (heptapeptide) | 7 (heptapeptide) |
| Most recent report on file | Medutest WWB-XA10-2430, 98.59% by HPLC (Semax 10 mg, Feb 25, 2026) | Janoshik Analytical #136391, 99.22% by HPLC, 10.13 mg measured (Selank 10 mg, Apr 22, 2026) |
Sequences
- Semax. Met-Glu-His-Phe-Pro-Gly-Pro
- Selank. Thr-Lys-Pro-Arg-Pro-Gly-Pro
The same design idea, applied twice
Both peptides came from the same Russian research programme and both use the same trick: take a short natural fragment and add Pro-Gly-Pro to the C-terminus to slow its breakdown by enzymes. What differs is the fragment.
- Semax starts with Met-Glu-His-Phe, residues 4 to 7 of adrenocorticotropic hormone (ACTH).
- Selank starts with Thr-Lys-Pro-Arg, the immunoglobulin fragment known as tuftsin.
Because the last three residues are identical, the two masses differ only by the difference between those two four-residue fragments: 813.93 against 751.89 g/mol, a gap of 62 daltons that any mass spectrometer resolves.
What differs in the laboratory
- Oxidation. Semax begins with methionine, which oxidises to the sulfoxide, adding 16 Da and giving a shoulder that elutes slightly earlier. Selank has no methionine, cysteine or tryptophan and has no comparable weak point.
- Charge. Selank carries a lysine and an arginine and is strongly basic. Semax has one glutamate and one histidine and sits close to neutral. The two respond very differently to a change in mobile-phase pH.
- Ultraviolet absorbance. Semax has a phenylalanine and a histidine. Selank has no aromatic residue at all. Neither absorbs usefully at 280 nm, so both are measured at 210 to 220 nm.
- Peak shape. Three of Selank’s seven residues are proline, against two in Semax. Proline-rich peptides can give a broadened or shouldered main peak that sharpens when the column is warmed. In Selank a shoulder of that kind is the peptide itself. In Semax an early shoulder is more likely to be oxidised material. The two look alike and mean opposite things.
Mass spectrometry confirms identity at a monoisotopic 814.4 for protonated Semax and 752.4 for protonated Selank.
Documentation on file
The table shows the most recent report for each compound. Selank has two reports on file for its 10 mg lot, from two different laboratories, which gives a cross-check that a single report cannot. Semax has one. The full lists, with report numbers and links, are in each compound’s research guide and in the COA library.
What this page does not compare
Both peptides have a literature in rodent models, mostly from Russian laboratories, and Selank is registered in Russia as a medicine. None of that is compared here. This page does not say which compound is suited to which line of research, and it says nothing about effects in any living system.
Full reference pages: Semax research guide and Selank research guide. Background: HPLC and mass spectrometry and storing lyophilized peptides.
For laboratory research use only. Not for human or veterinary use.
Questions about SEMAX and SELANK
How do SEMAX and SELANK differ as molecules?
SEMAX is a heptapeptide (ACTH 4-10 fragment analog): 7 residues (heptapeptide), molecular weight 813.93 g/mol, CAS number 80714-61-0. SELANK is a heptapeptide (tuftsin analog): 7 residues (heptapeptide), molecular weight 751.89 g/mol, CAS number 129954-34-3. The side-by-side table on this page lists sequence, mass and analytical notes for each.
Are StarBio's SEMAX and SELANK independently tested?
The current SEMAX batch was tested by Medutest (Medutest report WWB-XA10-2430): 98.59% purity by HPLC, tested Feb 25, 2026. The report is on file in the COA library (report page). The current SELANK batch was tested by Janoshik Analytical (Janoshik Analytical report #136391): 99.22% purity by HPLC, measured content 10.13 mg against 10 mg labelled, tested Apr 22, 2026. The report is on file in the COA library (report page). Janoshik Analytical reports can be checked on janoshik.com with the report number.
Does this page compare the effects of SEMAX and SELANK?
No. It compares them as research materials: identity, chemistry, analytical behaviour and documentation. StarBio does not publish effect, dosing or protocol information. The products are for in vitro laboratory research only, not for human or veterinary use.
New reports and guides, by email
A short note when a new laboratory report is published, when a compound returns to stock, and when a new guide goes up. Nothing else. Leave whenever you like.
For laboratory research use only. No dosing or protocol content is ever sent.

