# How to Verify a Janoshik or Medutest Report Before You Order

> Markdown copy of https://starbio.org/verify-janoshik-medutest-report/ for language models and reading tools. The web page is the reference version: cite that address. Page last updated November 10, 2026.
>
> Research use only. StarBio supplies materials for in vitro laboratory research. They are not for human or veterinary use.

*Research use only. StarBio products are supplied strictly for in vitro laboratory research by qualified professionals. They are not for human or veterinary use, not for diagnostic or therapeutic use, and have not been evaluated by the FDA. This guide covers documentation only.*

A certificate of analysis is a claim made by a laboratory about one sample. A vendor’s product page is a claim about that certificate. The two are only connected if you can walk from the page to the lab’s own record and find the same numbers. This guide shows how to do that walk for the two laboratories whose reports appear on StarBio’s product pages, Janoshik Analytical and Medutest, and what to do when the walk fails.

## Why the lookup matters more than the PDF

A PDF or PNG of a certificate can be edited. Report numbers, QR codes and verification keys can be cropped out. There are documented cases in the research-compound market where a certificate shown by a vendor turned out, when the test number was looked up at the lab, to describe a different product entirely. The fix is not to trust a better-looking PDF. It is to confirm the record at the source.

Three things make a report verifiable:

1. A report number issued by the lab.
2. A public lookup, or at least a lab contact that will confirm a number.
3. A description on the report (compound, labelled amount, sample date) that matches the product in front of you.

## Verifying a Janoshik Analytical report

Janoshik publishes each test it releases at a URL built from the report number. A StarBio report looks like this: report #136388, for BPC-157 10 mg, with the public page at `janoshik.com/tests/136388-...`. StarBio links that page directly from the [BPC-157 product page](https://starbio.org/product/bpc-157/) and the [COA library](https://starbio.org/coa/).

Steps:

1. Find the report number on the product page. StarBio prints it in the lot history table and in the product FAQ (“Janoshik Analytical report #136388”).
2. Open the link, or go to janoshik.com and use the lab’s test lookup with that number. Do not rely on a link inside a PDF alone; type the number.
3. On the lab’s page, check four fields against the product page: the compound name, the labelled amount, the measured purity (HPLC area percent), and the test date.
4. Check the sample photograph. Janoshik reports include an image of the sample as received. The vial should look like the product you are considering.
5. Look at the measured content where the report gives one. For the BPC-157 report above the lab measured 10.21 mg against a 10 mg label. A measured mass alongside a purity figure is more informative than purity alone, because it rules out an underfilled vial of pure material.

If any of the four fields disagree with the product page, stop and ask the vendor which lot the page is describing.

## Verifying a Medutest report

Medutest reports carry an alphanumeric report code (StarBio’s take the form WWB-XXX-NNNN, for example WWB-5AD-4095 for AOD-9604 5 mg, issued February 7, 2026) together with the compound, labelled amount, HPLC purity and issue date. StarBio hosts the report image and lists each code in the COA library.

Steps:

1. Note the report code, compound, labelled amount and issue date from the product page or library.
2. Confirm the same four fields on the hosted report image. They should agree exactly, including the spelling of the compound and the unit.
3. Where a public lookup is not available for a given report, email the laboratory with the report code and ask them to confirm it was issued for that compound and amount on that date. A legitimate lab will answer this; a report that cannot be confirmed by the lab that supposedly issued it should be treated as unverified.
4. Compare the report’s issue date with the product’s lot date or the vendor’s stated test date. A report that predates the lot it supposedly covers is describing a different lot.

## Matching the report to the vial you receive

A verified report proves that the lab tested a sample. It does not by itself prove that your vial came from the same batch. That link is lot traceability, and it is the step most buyers skip.

StarBio ships sealed vials and keeps the lot record in its system rather than printing it on the label, which is why the [verify-lot form](https://starbio.org/verify-lot/) exists: enter the order number and the compound, and StarBio returns the certificate that covers the batch your order was filled from. The reasoning behind that design, and what a lot number should and should not tell you, is in [lot numbers and batch traceability](https://starbio.org/lot-numbers-batch-traceability/).

## Red flags, in order of seriousness

- **No report number anywhere.** A certificate with purity figures but no issuing number cannot be checked. Treat it as marketing.
- **Report number that returns a different product at the lab.** This is the forgery pattern. Walk away.
- **Cropped or missing verification code or QR.** Janoshik reports carry a verification key; its absence on a vendor’s copy is a reason to look the number up yourself.
- **A single report reused across sizes or across years.** Each lot should have its own report. A 2024 report on a product restocked in 2026 is not the current lot’s documentation.
- **“In-house tested” presented as third-party.** The lab named on the report should be independent of the vendor and of the manufacturer. How the independent testing ecosystem is structured, and why that independence matters, is covered in [the independent testing ecosystem](https://starbio.org/independent-peptide-testing-ecosystem/).
- **Vague wording in place of numbers.** “Meets specification”, “conforms”, “pharmaceutical grade” without a figure and a method.
- **Purity with no identity.** HPLC area percent says how much of what is in the vial is one thing. Mass spectrometry says what that thing is. A report should carry both; a 99% figure with no mass confirmation could describe 99% of the wrong molecule. The full field-by-field read is in [how to read a certificate of analysis](https://starbio.org/how-to-read-a-certificate-of-analysis/).

## A worked example with two StarBio reports

| Field | BPC-157 10 mg | GLP-3 (RT) 10 mg |
| --- | --- | --- |
| Laboratory | Janoshik Analytical | Janoshik Analytical |
| Report | #136388 | #136394 |
| Tested | April 22, 2026 | April 22, 2026 |
| HPLC purity | 99.70% | 99.86% |
| Where to check | janoshik.com test lookup | janoshik.com test lookup |
| Product page | [BPC-157](https://starbio.org/product/bpc-157/) | [GLP-3 (RT)](https://starbio.org/product/glp-3-rt/) |

Both reports are the current ones on file at the time of writing. The COA library is the place to see whether a newer report has replaced them.

## A one-minute routine

1. Read the report number off the product page.
2. Look it up at the lab, not in the PDF.
3. Match compound, amount, purity, date.
4. Check the sample photo where there is one.
5. After delivery, use the vendor’s lot or order lookup to tie your vial to a report.

Five steps, about a minute, and the certificate has gone from a picture to a record.

## References

1. StarBio COA Library. https://starbio.org/coa/
2. StarBio, How to read a certificate of analysis. https://starbio.org/how-to-read-a-certificate-of-analysis/
3. StarBio, Lot numbers and batch traceability in research materials. https://starbio.org/lot-numbers-batch-traceability/
4. StarBio, The independent testing ecosystem. https://starbio.org/independent-peptide-testing-ecosystem/

Related guides: [how to vet a research peptide vendor](https://starbio.org/how-to-vet-a-research-peptide-vendor/), [what 99% purity actually means](https://starbio.org/what-99-percent-purity-means/).

*For laboratory research use only. Not for human or veterinary use.*

---

StarBio: https://starbio.org/ | Site summary for language models: https://starbio.org/llms.txt | Laboratory report data: https://starbio.org/coa.json
